Compliance

AIR-1

Contains FCC ID: 2AC7Z-ESPC3MINII

CAUTION: The manufacturer is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
Manufacturer:
330 Douglas Ave
Versailles, KY 40383
support@apolloautomation.com
www.apolloautomation.com
Modular Components Used:

NAME: Wi-Fi & Bluetooth Internet of Things Module MODEL: ESP32-C3-MINI-1U FCC ID: 2AC7Z-ESPC3MINII

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

MSR-1

Contains FCC ID: 2AC7Z-ESPC3MINII

CAUTION: The manufacturer is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
Manufacturer:
330 Douglas Ave
Versailles, KY 40383
support@apolloautomation.com
www.apolloautomation.com
Modular Components Used:

NAME: Wi-Fi & Bluetooth Internet of Things Module MODEL: ESP32-C3-MINI-1U FCC ID: 2AC7Z-ESPC3MINII

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

MSR-2

Contains FCC ID: 2AC7Z-ESPC3MINII

CAUTION: The manufacturer is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
Manufacturer:
330 Douglas Ave
Versailles, KY 40383
support@apolloautomation.com
www.apolloautomation.com
Modular Components Used:

NAME: Wi-Fi & Bluetooth Internet of Things Module MODEL: ESP32-C3-MINI-1U FCC ID: 2AC7Z-ESPC3MINII

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

PLT-1

Contains FCC ID: 2AC7Z-ESPC3MINII

CAUTION: The manufacturer is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
Manufacturer:
330 Douglas Ave
Versailles, KY 40383
support@apolloautomation.com
www.apolloautomation.com
Modular Components Used:

NAME: Wi-Fi & Bluetooth Internet of Things Module MODEL: ESP32-C3-MINI-1U FCC ID: 2AC7Z-ESPC3MINII

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

AIR-1

Contains FCC ID: 2AC7Z-ESPC3MINII

CAUTION: The manufacturer is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
Manufacturer:
330 Douglas Ave
Versailles, KY 40383
support@apolloautomation.com
www.apolloautomation.com
Modular Components Used:

NAME: Wi-Fi & Bluetooth Internet of Things Module MODEL: ESP32-C3-MINI-1U FCC ID: 2AC7Z-ESPC3MINII

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

TEMP-1

Contains FCC ID: 2AC7Z-ESPC3MINII

CAUTION: The manufacturer is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
Manufacturer:
330 Douglas Ave
Versailles, KY 40383
support@apolloautomation.com
www.apolloautomation.com
Modular Components Used:

NAME: Wi-Fi & Bluetooth Internet of Things Module MODEL: ESP32-C3-MINI-1U FCC ID: 2AC7Z-ESPC3MINII

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

Apollo Automation is committed to complying with the European Union’s WEEE Directive 2012/19/EU. This ensures that our products are disposed of in an environmentally responsible manner, supporting sustainable practices and protecting public health.

 

The crossed-out wheeled-bin symbol on the product and its packaging indicates that the product must not be disposed of with your household waste. The separate collection and recycling of these items help conserve natural resources and prevent potential negative effects on human health and the environment due to the presence of hazardous substances in electrical and electronic equipment, which could result from improper disposal.

 

Recycle your old electronics by using your nearest collection point for WEEE. We have partnered with certified recyclers to ensure proper handling and recycling of waste electrical and electronic equipment. Please use the links in the table below to find the nearest collection points for WEEE.

DEEE IDU n° FR429204_05MNUJ

Trouvez un point de collecte proche de chez vous
Packaging Registration number: Emballages IDU n° FR429204_01JMQQ

WEEE-Reg-Nr DE 75591514
Packaging Registration number: Verpackungsreg.-Nr. (LUCID) DE2665562388721

Waiting for our certification number
https://inleverpunten.stichting-open.org/

WEE/MM6528AA

Electrical recycling near me