Zooz Z-Wave Long Range 700 Series Titan Water Valve Actuator ZAC36 LR

• Automatic shut-off: connect the Titan valve actuator to your Z-Wave hub to close your water valve automatically anytime a leak is detected on any of the connecter water sensors
  
• 0.5" - 1.25" ball valves only: please check your water valve for compatibility first
• Check your valve first: you'll need 3" clearance to each side from the center of the valve, 1" clearance between the pipe and the wall, and at least 1.25" clearance between the valve handle and the pipe.
• Works offline: a wired leak sensor probe is included to shut your water off even if the hub is offline or if you don't have a Z-Wave controller at all!
  
• Indoor / outdoor: install the actuator outdoors if this is where your water main is.
  
• Back-up battery (sold separately): add extra peace of mind with a smart power pack for the Titan (buy here). The Titan automatically shuts down right before the battery is fully drained, thanks to its smart auto shut-off feature.
• Tool-free DIY installation: you'll be done in less than 5 minutes! Remember to install and calibrate the valve before testing it.
• Extremely powerful: the Titan actuator auto-calibrates and tackles even the most stubborn valves
• Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
• New 700 series Z-Wave chip: faster, more secure, and reliable wireless communication with greater range than ever 
• SmartStart for easier and safer pairing
  
• 5-year warranty and lifetime tech support
  
• Check out ZAC36 Frequently Asked Questions

NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.